Made in USA

 (909) 971-0000
 iTroll4Fishing@iTroll.us

    


iTroll: We Never, Ever Compromise

iTroll Custom Mounts

Note: RAM components shown in pictures below are NOT INCLUDED with iTroll mounts and are available for purchase separately.

This is because RAM makes multiple base styles AND arm lengths. We cannot predict which combination of base and arm would work on a particular boat.

RAM parts that we stock are shown at bottom of page.


A stock iTroll control head has a plastic back plate and is normally mounted to a hard, flat surface using supplied velcro or similar types of mating tapes. Additionally, many customers use four arm "X" style phone holders made by RAM or other manufacturers to hold their iTrolls.

iTroll w/o Mount iTroll w/o Mount




iTroll's Custom Mount
Allows you multiple options to mount the control head

Note: Mounts are optional, extra cost accessories.

The iTroll custom mount consists of a ball mount assembly and a back plate that is substituted for the plastic unit on a standard iTroll. This mount's ability to quick release does NOT require loosening of the RAM mount. This allows the RAM mount to stay locked into position so you will never have to reset it's angles!

Mounts are available in a choice of materials:
1. The original Anodized Billet Aluminum version ($105.00).
2. A more affordable version made of Marine Grade Polymer ($70.00).
(Note: Polymer material will NOT fade, crack, or peel.)
iTroll Billet Mount iTroll P Mount

Billet aluminum version (left). All the billet pieces are anodized in a striking marine blue color.
The "BLING" factor of this mount is incredible and is sure to wow anyone who sees it!


Polymer version is black (right).
Note that the back surface is textured for grip if you ever hold your iTroll while fishing.

iTroll Billet Mount iTroll P Mount


The ball assembly slides into the dovetail on the back plate and you lock the two together with the white thumb screw.


iTroll with custom mount back plates installed.

"B Mount" = Billet Anodized Aluminum
"P Mount" = Marine Grade Polymer


iTroll Billet Mount iTroll Billet Mount

iTroll P Mount iTroll P Mount


Billet mount option #1: Surface mounting
Note: Polymer version does NOT have threaded holes for surface mounting.

Billet Mount Billet Surface Mount

The billet back plate has two threaded holes to allow you to surface mount iTroll to a flat surface. Thread is 10-32 x 1/4 inch deep. We recommend using thumb bolts and backing washers when surface mounting so your iTroll can be removed without tools.



Custom mount option #2:
Helm mounting with one inch (B size) RAM components

Note: RAM components available for purchase at additional cost.

Front view of iTroll mounted directly under graph / fish finder:

Cisco Mount iTroll mount

Notes on this install:
1. The fish finder is mounted on a Cisco mount.
2. The RAM base is mounted to our stainless steel Cisco plate that is sandwiched between the Cisco mount and it's base plate. The Cisco plate is available for purchase when you configure your iTroll system.


Custom mount option #3:
Track / rail mounting with one inch (B size) RAM components

Note: RAM components available for purchase at additional cost.

Many boats have a track system integrated into the gunnels.
Mount a RAM base onto a plate that engages the track to rail mount your iTroll:

P Mount on Rail P Mount on rail


RAM pieces we stock:


Why are RAM pieces sold separately from the iTroll mount?

Answer: RAM makes many different base and arm types and sizes. Every boat is different, so it would be impossible for us to supply the correct arm and base for each installation. We stock the four most popular part numbers so you can custom configure the installation for your boat.

Ball with diamond base used in
Helm station / Under fish finder mounting:

Ram Diamond Base



Medium length arm used in
Helm station / Under fish finder mounting:

RAM Medium Arm

Ball with round base used in
Track / rail mounting:

RAM Round Base



Short length arm used in
Track / rail mounting:

RAM Short Arm